What are the Various Reasons Your Garage Door Won’t Stay Closed?

Garage Door Wont Stay Closed

There is no point in arguing that using your garage door over an extended period of time is bound to provide hindrances. Neither less to say, there could be a plethora of reasons due to which your garage door won’t stay closed. Sometimes the opener might malfunction or at other times, due to the gradual aging of the entire door. In fact, the sole purpose of this article is to make you aware of the various reasons why your garage door won’t stay closed.


Top Reasons Your Garage Door Won’t Stay Closed 


1) The Transmission Batteries are Dead

One of the most obvious reasons due to which your garage door is neither opening nor closing is due to dead transmission batteries. This, in turn, restricts the transmitter from sending any signals. One of the best ways to check is whether you are able to open your door manually or pressing the buttons physically? This is a clear indication that the transmitter requires new batteries. Changing the same will get the job done.


2) The Photo Eye is Out of Alignment

If you find that your garage door can easily open, but it has a hard time closing, make sure to physically check the photo eye of the sensor. Over time, accumulated dust can block the light beams to make contact with the same. Eventually, this can also lead to misalignment, where the two eyes don’t match on either side. While cleaning the phot eye, make sure not to damage the eye. This, in turn, can jeopardize the overall process.


3) Misaligned Garage Door Track

Misaligned garage door track can actually pose a serious threat to the garage door. The track needs to be properly aligned in order for the garage door to operate seamlessly. Seeing a gap between the roller and the rail or even bent portions of the rails means your garage door won’t close properly. The heavyweights of the door add up to the problem, posing threats to other parts of the door as well.


4) The Transmitter Isn’t Working 

In the previous section, we have already discussed one of the most common problems regarding garage door transmitters. But, there are other factors at play as well. Sometimes this can be something as trivial as the transmitter is out of range of the garage door. Looking at your specific garage door manual can actually provide you with a better chance to diagnose the problem. Under such circumstances, it is always better to open the door manually during the being.


5) Blockage in the Path of Garage Door 

All the latest models of the garage door are packed with the auto-reversing mechanism. This, in turn, enables the door to retract from closing if something is creating a block at its path. While this offers the perfect security for your kids and pets, it can also get tedious at times. The build-up dirt and debris over time can block the path and stop the garage door from closing properly.


6) Broken Garage Door Springs

If your garage door is not closing properly or closing abruptly, even with a working transmitter, chances are the torsion spring of the garage door is broken. Generally, when a garage door spring breaks, it makes a large banging sound. With a broken garage door spring, the opener won’t be able to lift the entire weight of the garage door. Under such circumstances, it is always advised to consult with a garage door professional.


7) Wrong Garage Door Limit Settings 

There are instances where you will find that the garage door closes but immediately retracts to its previous form. This is something that is mainly common with new garage doors where the limits are not properly set. The limit settings within the garage door actually direct the door how much does it have to open or close. You can find the knob somewhere around the motor. Adjust the limits, so get the right settings according to your preference.


8) Enabling the Disconnect Switch 

One of the easiest ways to find if the disconnect switch is enabled or not if the garage door motor is running, yet the door is unable to open. The sole idea behind the disconnect switch is to provide safety during a power outage. So, in case the power comes back, it doesn’t automatically open the garage door. For the majority of the time, you can find the switch attached to the rope. There are also instances where accidentally you can turn on the switch. So, our advice would be to try operating the door after disabling the switch. If your garage door works perfectly, you are always good to go.


9) Broken Tension Spring or Cable 

The tension spring and cable are mainly responsible for lowering the garage door safely and slowly. In case the tension spring or cable breaks, your garage door can fall abruptly. In fact, you will find your garage door falling with a loud bang. This, in turn, is not only dangerous but can also further damage other parts of the garage door as well. Even when one of them breaks, the other follows as well. Under such circumstances, the best course of action is to take professional assistance replacing the tension spring and cable.


Get in Touch with the Professionals 

We here at Silver Fox Garage Door Repair offers one of the most comprehensive garage door repair services in Las Vegas. Whether it is a residential or commercial garage door that’s giving you a hard time, we have got you covered.


All of our certified technicians have a clear understanding of what’s wrong with your garage door, enabling you to get along the repair processes as fast as possible. Working side by side with some of the top manufacturers and suppliers, you can rest assured to get authentic garage door parts during replacement as well. So, what are you waiting for? Grab the greatest opportunity of all time, and get in touch with Silver Fox Garage Door Repair.


Recommended Posts

No comment yet, add your voice below!

Add a Comment

Your email address will not be published. Required fields are marked *